Yes, the net kits meet the ASTM certifications for pool covers. Read More.

For the medium to large size pool nets expect 4-6 hours for 2 people.

No! Each net is made to order and intended for your pool alone. Fully customized to your pool/pond during installation they are not returnable.

No, your pool much have an edge at least 6" above the waterline to correctly install a safety net.

Basic house hold tools are a great start but 3 tools you might may not have are a masonry drill w/ 3/4" drill bit, a rubber mallet and a hot knife or soldering iron (used to cut and trim the netting). The drill can be rented from most tool rental companies, the mallet and the soldering iron are relatively inexpensive and can be acquired from any hardware.

As you are not likely in an territory covered by factory installers you can choose to hire a contractor or pool company to do the installation if you are not confident about doing it yourself.

Yes, only when the above ground pool has wood decking or similar on all sides. 
The net cannot be attached to the pools frame.

No. We only sell the Do-It-Yourself net kits.

We ship nets all over the world, if FedEx or UPS deliver there we can ship to you. For our Caribbean, Central American and Middle Eastern clients we typically ship to a US based freight forwarder.

No. The net anchor surface must be solid and cannot move during your intended use life of the net. There is significant tension on the anchor points.